Calibration

 Description

  • This model is available in two series: CER6000-RR (reference resistor) and CER6000-RW (standard reference resistor). The RR series of 4-wire reference resistors offer high accuracy and stability at an economic cost. Designed specifically for use as a comparison standard for AC thermometry resistance bridges of the ASL range, the RR series may also be used in electrical standards laboratories.
  • In addition to standard fixed values, resistors can be supplied in any value between 1 and 10,000 Ω. Typical applications for the RR series are as transfer standards or reference source in temperature calibration or electrical standards laboratories.

Pressure calibrator Standard version Model CPH6000

  •  Applications
  • Calibration service companies and service industry
  • Maintenance facilities
  • Measurement and control laboratories
  • Quality assurance
  • Special features
  • Digital indicator with easily interchangeable reference
  • pressure sensors model CPT6000 (sensor can also be
  • attached externally)
  • Measuring ranges of sensor: from -1 … 6,000 bar
  • [-14.5 … 87,000 psi]
  • Accuracy: up to 0.025 % (incl. calibration certificate)
  • Easy handling for calibration and pressure switch test
  • function with calibration assistant
  • Software compatible with WIKA-Cal

Hand-held pressure indicator With external reference pressure sensor, 1- or 2-channel version Models CPH6200-S1 and CPH6200-S2

  •  Applications
  • Calibration service companies and service industry
  • Measurement and control laboratories
  • Pressure tests
  • Special features
  • Digital indicator with interchangeable pressure sensors
  • (plug-and-play)
  • Measuring ranges 0 … 1,000 bar [0 … 14,500 psi]
  • Type of pressure: Positive and negative overpressure,
  • absolute pressure and differential pressure
  • Accuracy: 0.2 %, optionally 0.1 % (incl. calibration
  • certificate)
  • Data logger for recording measured values

Intrinsically safe hand-held pressure indicator Model CPH62I0-S1 (1-channel version) Model CPH62I0-S2 (2-channel version)

  •  Applications
  • Calibration service companies and service industry
  • Measurement and control laboratories
  • Pressure tests
  • Special features
  • Intrinsically safe indicator with interchangeable pressure
  • sensors model CPT62I0 (plug-and-play)
  • Measuring ranges 0 … 1,000 bar [0 … 14,500 psi]
  • Type of pressure: Positive and negative overpressure,
  • absolute pressure and differential pressure
  • Accuracy: 0.2 %, optionally 0.1 % (incl. calibration
  • certificate)
  • Data logger for recording measured values

Hand-held pressure indicator Model CPH6300-S1 (1-channel version) Model CPH6300-S2 (2-channel version)

  •  Applications
  • Calibration service companies and service industry
  • Measurement and control laboratories
  • Quality assurance
  • Leak testing
  • Special features
  • Robust and waterproof digital indicator with
  • interchangeable pressure sensors (plug-and-play)
  • Measuring ranges from 0 … 25 mbar to 0 … 1,000 bar
  • (0 … 0.4 psi bis 0 … 14,500 psi)
  • Pressure type: positive and negative gauge pressure,
  • absolute pressure and differential pressure
  • Accuracy: 0.2 %, optional 0.1 % (incl. calibration
  • certificate)
  • Software and complete service cases (incl. pumps)
  • available

Precision hand-held pressure indicator Model CPH6400

  •  Applications
  • Calibration service companies and service industry
  • Measurement and control laboratories
  • Quality assurance
  • Special features
  • Digital indicator with easily interchangeable reference
  • pressure sensors (plug-and-play)
  • Measuring ranges from -1 … 6,000 bar (-15 … 75,000 psi
  • (vacuum and absolute pressure ranges also available)
  • Accuracy: 0.025 % (incl. calibration certificate)
  • Simultaneous pressure and temperature measurement
  • with external Pt100 temperature probe
  • Min, max, pressure rate and data logger function

Portable process calibrator Model CPH7000

  •  Applications
  • Calibration service companies and service industry
  • Measurement and control laboratories
  • Quality assurance
  • On-site calibration (safety also in hazardous areas)
  • Special features
  • Manual pressure generation of -0.85 … +25 bar
  • [12.3 … +360 psi]
  • Accuracy: 0.025 % FS (incl. calibration certificate)
  • Generation/measurement of 0 … 24 mA and voltage
  • supply DC 24 V
  • Data logger with high measuring rate and large memory
  • Intrinsically safe version

Pneumatic hand test pump Model CPP7-H

  •  Applications
  • Simple test pressure generation on site, in the laboratory
  • or in the workshop
  • Supply of small positive or negative pressures
  • Specifically for the testing, adjustment and calibration
  • of low-pressure measuring instruments in the areas of:
  • heating, ventilation and air conditioning, clean room
  • engineering, medical engineering and filtration and dust
  • removal technology
  • Special features
  • Switchable pressure/vacuum generation
  • Precise setting through the fine adjustment valve
  • Simple and ergonomic handling
  • Compact dimensions
  • Low weight

Hand test pump, pneumatic Model CPP30

  •  Applications
  • Simple test pressure generation on site, in the laboratory
  • or in the workshop
  • For the testing, adjustment and calibration of all types of
  • pressure measuring instruments
  • Pneumatic pressure generation from -0.95 … +35 bar
  • (-28 inHg … +500 psi)
  • Special features
  • Ergonomic handling
  • Precise setting through the fine adjustment valve
  • Compact dimensions
  • Low weight

Pneumatic comparison test pump Model CPP120-X

  •  Applications
  • Pneumatic provision of pressure on site, in the laboratory
  • or in the workshop up to 120 bar
  • For the testing, adjustment and calibration of all types of
  • pressure measuring instruments
  • Special features
  • Two fine metering valves for pressure inlet and pressure
  • outlet or vacuum
  • Precisely adjustable volume adjuster for fine adjustment of
  • pressure
  • Proven technology of the dead-weight tester CPB3500
  • Connection for external pressure or vacuum source
  • Pressure gauge for indicating the approximate pressure

Hydraulic hand test pump Models CPP700-H and CPP1000-H

  •  Applications
  • Simple test pressure generation on site, in the laboratory
  • or in the workshop
  • For the testing, adjustment and calibration of all types of
  • pressure measuring instruments
  • Hydraulic pressure generation up to 700 bar (10,000 psi)
  • or 1,000 bar (14,500 psi)
  • Special features
  • Ergonomic handling
  • Precise setting through the fine adjustment valve
  • Compact dimensions
  • Low weight

Hydraulic hand spindle pump Models CPP1000-M, CPP1000-L

  •  Applications
  • Calibration service companies and service industry
  • Calibrations directly on site
  • Maintenance and service facilities
  • Hydraulic pressure generation up to 1,000 bar (14,500 psi)
  • Special features
  • Ergonomic handling through the smooth-running,
  • internally operating, precision spindle
  • Integrated oil reservoir
  • Removable star handle
  • Freely rotating test connections (i.e. measuring
  • instruments can be aligned)
  • Precise setting of the test pressure through a fine
  • adjustment valve (optional for model CPP1000-M)
37 Satras Co Poya Fanavran

Hydraulic comparison test pump Models CPP1000-X, CPP1600-X

  •  Applications
  • Calibration service companies and service industry
  • Maintenance and service facilities
  • For the testing, adjustment and calibration of all types of
  • pressure measuring instruments
  • Hydraulic pressure generation up to 1,600 bar (23,200 psi)
  • Special features
  • Ergonomic handling through the smooth-running,
  • internally operating, precision spindle
  • Integrated oil reservoir
  • Removable star handle
  • Freely rotating test connections (i.e. measuring
  • instruments can be aligned)
  • Integrated priming pump for large test volumes

Hydraulic comparison test pump Model CPP1200-X

  •  Applications
  • Simple hydraulic test pressure generation on-site, in the
  • laboratory or in the workshop
  • For the testing, adjustment and calibration of all types of
  • pressure measuring instruments
  • Hydraulic pressure generation up to 1,200 bar
  • Special features
  • Precisely adjustable dual-area spindle pump for filling,
  • pressure generation and fine adjustment of pressure
  • Freely rotating test connections (i.e. measuring
  • instruments can be orientated)
  • Proven technology of the model CPB3800 pressure
  • balance
  • Compact dimensions
  • Low weight

Hydraulic comparison test pump Model CPP4000-X

  •  Applications
  • Simple hydraulic test pressure generation on site, in the
  • laboratory or in the workshop
  • For the testing, adjustment and calibration of all types of
  • pressure measuring instruments
  • Hydraulic pressure generation up to 4,000 bar
  • Special features
  • Precisely adjustable dual-area spindle pump for filling,
  • pressure generation and fine adjustment of pressure
  • Proven technology of the model CPB3800HP dead-weight
  • tester
  • Compact dimensions
  • Low weight

Temperature dry-well calibrator Models CTD9100-COOL, CTD9100-165, CTD9100-450, CTD9100-650

  •  Applications
  • Easy on-site calibration
  • Power generation
  • Measurement and control laboratories
  • Machine building
  • Special features
  • Various temperature ranges
  • Measurement uncertainties from 0.15 … 0.8 K
  • Compact design
  • Simple operation

41 Satras Co Poya Fanavran

Temperature dry-well calibrator Model CTD4000

  •  Applications
  • Testing and calibration of temperature measuring
  • instruments
  • Reference instrument for easy and quick measurements
  • Suitable for on-site use
  • Special features
  • High stability
  • Possibility to check temperature switches
  • Low weight and compact design
  • Simple operation
    .

Welcome To Our Website

Poya Fanavran  company is working with a team of active technical experts to provide technical and engineering services in the field of electronics, control, instrumentation and industrial automation. We are proud that during the last few years we have tried to be a pioneer in the field of supplying precision instruments and manufacturing them in Iran and we have taken the best and biggest steps in the production of  these equipments.

Scroll to Top